Processing

CavaStop 300 against rising damp is normally applied when drill from the inside approx. 10-15 cm above the floor an. If drilling from the outside, then approx. 10-15 cm above the ground or directly below the first floor slab.

The drilling distances depend on the wall thickness and its condition, as well as the amount of material. This information can be found in the drilling table and the drilling diagram.

The drilling angle is approx. 40° diagonally downwards, of Drill diameter 16mm and the Drill hole depth approx. 5 cm before the end of the wall.

CavaStop 300 is simply filled into these boreholes through the cartridges with the outlet nozzle.

You should pay attention to this

Important notes

Cavastop 300

Say goodbye to damp walls now!